Dual Type Coating Thickness Gauge AD-3256
Two measurement methods available– Electromagnetic and Eddy-current
Identify ferrous and nonferrous substrates automatically and measure thickness
3-color LED lamp for thickness judgment
When the upper and lower limits are set, the color of the LED lamp can be used to determine whether the test has passed or failed.
The LED lamp glows orange when the upper limit is exceeded, red when it is below the lower limit, and green when it is within the upper and lower limits.
The LED lamp can also be turned off.
Zero-point calibration using one or two points.
Select the type of calibration that best suits your requirements: single-point calibration with the zero-calibration plate only, or two point calibration with the zero-calibration plate and adjustment test piece.
Average, minimum and maximum value display.
Average, minimum, and maximum values are calculated from data stored in the device and displayed on screen.
You can check the catalogs of the AD-3256 from the following links.
- Categories
- NEWS
