TRUSCO Solid Carbide Coating Drill

Workpiece material: S50C – Tool diameter: ø6 (TRP2D0600S06) – Drilling depth: 12 mm (stop)

Cutting conditions: Vc = 80 m/min, f = 0.2 mm/rev

Tool protrusion: 26 mm

Water-soluble cutting oil (external lubrication)

Each drill is individually stamped with a lot number and quality-controlled.

Quality checks are carried out at the cemented carbide material stage, where the drill is made from, and several intermediate dimensional inspections are carried out before the product is manufactured, with careful quality checks carried out at each stage of the process.

Only products that have passed the strict inspections at each stage of the process are inscribed with a lot number.